AES Semigas

IQE

26 January 2022

ACM strengthens wet processing portfolio with new compound semiconductor tools

ACM Research Inc (ACM) of Fremont, CA, USA, which develops and manufactures wafer processing solutions for semiconductor and advanced wafer-level packaging (WLP) applications, has introduced its comprehensive tool set to support compound semiconductor manufacturing.

The 150–200mm bridge systems support front-end cleaning and a wide range of WLP applications for compound semiconductors including gallium arsenide (GaAs), gallium nitride (GaN) and silicon carbide (SiC) processes. The wet process portfolio includes coater, developer, photoresist (PR) stripper, wet etcher, cleaner and metal plating tools that feature automated systems for flat or notched wafers.

“The compound semiconductor industry is growing rapidly, with demand increasing across a variety of end markets,” says president & CEO Dr David Wang. “ACM has leveraged its expertise and technology in front-end and WLP tool sets to deliver high-performance and cost-effective systems to address the specific technology requirements of compound semiconductors. We believe the market for compound semiconductor capital equipment offers significant growth opportunities to ACM, as GaAs, GaN and SiC devices are becoming an increasingly integral part of future electric vehicle (EV), 5G communication system and artificial intelligence (AI) solutions.”

ACM’s compound semiconductor capital equipment portfolio includes the following:

  • Ultra C SiC cleaning tool: ACM’s Ultra C SiC cleaning tool targets SiC wafer cleaning using sulfuric peroxide mix (SPM) for surface oxidation and hydrofluoric (HF) acid to remove residues. It also features ACM’s SAPS and Smart Megasonix technologies to achieve a more comprehensive clean without damage to device features. The Ultra C SiC cleaning tool delivers advanced cleaning performance with less than 10@0.3µm particles per wafer and metal less than 1e10atoms per cm3. The tool delivers a throughput of more than 70 wafers per hour and is expected to be available in second-half 2022.
  • Ultra C wet etch tool: The Ultra C wet etch tool delivers uniformity of less than 2% for GaAs and indium gallium phosphide (InGaP) processes with repeatability of less than 2%. The Ultra C wet etch tool offers high-performance chemical temperature control and etching uniformity. The first Ultra C wet etch tool was delivered to a key customer in third-quarter 2021 and has since passed initial customer testing.
  • Ultra ECP GIII 1309 tool: ACM’s Ultra ECP GIII 1309 tool supports Cu pillar and solder for Cu, nickel (Ni) and tin silver (SnAg), as well as redistribution layer (RDL) and under-bump metallization (UBM) processes with integrated pre-wet and post-clean chambers. It achieves within-wafer and within-die uniformity of less than 3% and repeatability of less than 2%. The first Ultra ECP GIII 1309 tool was delivered to a key customer mid-2021 and successfully passed customer testing.
  • Ultra ECP GIII 1108 tool: The Ultra ECP GIII 1108 tool provides Au bumping, thin-film and deep via processes with integrated pre-wet and post-clean chambers. It uses ACM’s proven paddle technology for deep via plating to improve step coverage. It delivers within-wafer and within-die uniformity of less than 3% and repeatability of less than 2%. The chamber and tank are specially designed to avoid oxidation of the Au electrolyte, and the tank features a nitrogen gas (N2) purge function to reduce oxidation. The first Ultra ECP GIII 1108 tool was delivered to a key customer in late 2021 and successfully passed customer testing.
  • Ultra C ct coating system tool: ACM’s Ultra C ct coating system enables even coating of PR chemistry using double-coat, spin-coating technology. It offers advanced benefits, including precise coating control, auto-clean functionalities, hot and cold plate modules, and independent process control functions for each chamber.
  • Ultra C dv developer tool: ACM’s Ultra C dv developer tool performs the crucial steps of post-exposure baking, developing and hard bake for compound semiconductor processes. It leverages ACM’s superior technology to achieve +/-0.03LPM of the desired flow rate and +/-0.5 Celsius of the desired temperature.
  • Ultra C s scrubber system: The Ultra C s scrubber system leverages ACM’s wet cleaning technology for superior contaminant removal. It achieves high performance through N2 spray or high pressure to realize more effective cleaning for smaller particles. It is also fully compatible with ACM’s proprietary Smart Megasonix technology to ensure excellent particle removal efficiency (PRE) without damaging finer pattern structures.
  • Ultra C pr wet stripping system: ACM’s Ultra C pr wet stripping systems utilize both wet bench tank soaking and single-wafer processing to ensure maximum effectiveness for compound semiconductor stripping. The tool was recently ordered by a leading global integrated device manufacturer (IDM) for ease of use in PR removal, further validating ACM’s technology.
  • Ultra SFP polishing system: The Ultra SFP provides an environmentally friendly alternative to conventional chemical mechanical planarization (CMP) through-silicon via (TSV) processes and fan-out wafer-level packaging (FOWLP). In TSV applications, ACM’s stress-free polishing (SFP) system is used to remove bulk copper overburden down to 0.2µm by employing proprietary electro-polishing technology, further remove copper to barrier layer by employing conventional CMP, and to remove barrier by employing wet etch, which significantly reduces the cost of consumable. For FOWLP, the same process can handle wafer warpage caused by stress of thick copper layer, removes copper overburden and planarizes RDLs.

Tags: Wet processing systems

Visit: www.acmrcsh.com

RSS

Picosun